restorersmind

… or How I “Baroqued” a  Violin That Had Been Previously “Un-Baroqued”.

Try as I might, I could not come up with a catchy phrase that would indicate the opposite of “back to the future”. I love my profession for its fastidious regard for the past, its devotion to the present and its dogged assumption of a future. Because I work with things that are sometimes older than two, three, even four human life spans, I am frequently reminded that the path from here to there is rarely a straight line. In contrast, I think of my beloved Honda Civic which, with 110k miles, is surely headed for the trash heap – a short life lived on a simple trajectory.

The inspiration for this post is a violin made by an unidentified member of the  Amati family in Cremona, Italy. That would place its construction probably in the late 1600’s. Perhaps this violin was growing and maturing as Antonio Vivaldi assumed his post at the Ospedale Della Pietà in Venice. Certainly by the time J.S.Bach composed the Brandenburg Concertos, it had found its voice. How it ultimately found its way into 21st century America may never be known, but clearly it would have stories to tell.

My mission was to undo some of what had been done along the way. In the 1800’s many old instruments were retrofitted with a neck in the modern style. The earlier “baroque” style neck, was shorter, shaped differently, and had a ramped fingerboard. At some point, this Amati family violin had been “modernized”. The neck and fingerboard had been replaced with the modern version that we are most familiar with today.

Since my client was a teacher and performer of Baroque music, she wished to have her instrument returned to something approximating its original configuration. A note about early violin construction: originally, the neck of an instrument was secured with a nail driven from the inside of the body through the upper block. The top was glued on last. Here is an example, in this case, an ancient violin from Mittenwald, Germany. 

In converting an instrument to baroque, one must decide how far to go. In my client’s case, we wished to change the neck without opening the body. Perhaps in the future, if the instrument needs to be opened for additional reasons, we might discuss changing the bass bar too.

Essentially this job required grafting another new neck. But in this case, a standard modern dovetail joint was modified to achieve the look and feel of a nailed baroque style neck. This is the instrument as it came to me, with the standard contemporary configuration of neck and fingerboard:

The first few cuts are always made with the door locked and the phone turned off! The neck is removed from the body, and then the scroll is carefully cut away creating a tapered mortise, to which new neck wood will be fitted.

Here the scroll is ready to receive the new neck wood.

The joint fits perfectly and can be glued. Later, the peg box will be carved out and the neck shaped in preparation for setting into the body.

 With the fingerboard temporarily glued on, the neck is set into the body in the usual manner.

Before gluing, modifications will be made. A cutaway is planned to create a step at exactly the rib height. This will replicate the look and feel of the nailed neck. Also, the underside of the fingerboard will be reshaped in the baroque style.

This is how it looks with the fingerboard removed and the neck pushed back into the dovetail mortise. The top of the violin was cut through to accept the first modern neck. We now have a gap that will be filled with matching spruce, to restore the unbroken perimeter of the upper bouts.

Fitting this piece of spruce happens before the neck is glued. It will be glued in, shaped, and varnished to match after the neck is installed.

I use a baroque fingerboard made by Helmut Pöser in Germany. The core is spruce while the playing surface and sides are ebony. The fingerboard comes to me oversized so that it can be shaped and fitted appropriately.

The underside of the board is precisely ramped to create the correct pitch over the body of the instrument. The length that is suspended is shaped in an aesthetic manner, although in the ancient method of construction, this shape had a practical purpose as well. The bump near the base of the neck provided a positive point to insert a wedge which would exert downward pressure as the top was being glued onto the body.

The final neck shaping is done with the fingerboard permanently glued on. All new wood has been varnished to match the original.

The graft blends well into the old scroll.

The shape of the neck replicates the dimensions of an original Jacob Stainer violin neck c. 1620.

The new neck is finished! The violin is set up with new baroque tailpiece, bridge and gut strings.

Now, back to the future? Or would that be forward into the past?

Read Full Post »